Filter
Top Products
g.
Keyboard (see
Keyboard on page 101)
h. Base enclosure (see
Base enclosure on page 107)
Remove the RJ-11 jack cable:
1. Turn the base enclosure right-side up.
2. Position the base enclosure with the front toward you.
3. Release the RJ-11 jack from the clip (1) built into the base enclosure.
4. Release the RJ-11 jack cable from the clips (2) and routing channel built into the base enclosure.
5. Remove the RJ-11 jack cable.
Reverse this procedure to install the RJ-11 jack cable.
Component replacement procedures
113