Filter
Top Products
Remove the memory module:
1. Spread the retaining tabs (1) on each side of the memory module slot to release the memory
module. (The edge of the module opposite the slot rises away from the computer.)
2. Remove the memory module (2) by pulling the module away from the slot at an angle.
NOTE: Memory modules are designed with a notch (3) to prevent incorrect insertion into
the memory module slot.
NOTE: The computer uses two memory slots. The top slot houses the expansion memory module
and is shown in the first image below. The bottom slot houses the primary memory module and is
shown in the second image below.
Reverse this procedure to install a memory module.
Component replacement procedures
91