Filter
Top Products
Hard drive cover
NOTE: The hard drive cover is available in the Plastics kit, spare part number 702877-001.
Description Spare part number
Plastics kit 702877-001
Before removing the hard drive cover, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
Battery on page 40).
Remove the hard drive cover:
1. Loosen the 2 captive hard drive cover screws (1).
2. Slide the hard drive cover away from the computer (2), and then lift the cover off the computer
(3).
Reverse the removal procedures to install the hard drive cover.
Component replacement procedures 45