Filter
Top Products
3
ENGLISH
4.
Insert the black print cartridge in the
left side of the cradle.
5.
Push the print cartridge up to snap it
into position.
6.
Repeat steps 3 through 5 to insert the
tri-color print cartridge in the right
side of the cradle.
Caution!
The printer will not operate
unless both print cartridges are properly
installed.
7.
Close the front cover of the printer.
The
Resume
light continues to blink
for a few seconds and then stops.
The print cartridge cradle returns to
the right side of the printer.
If the Resume light continues to blink,
see “Solving a Problem” for help.
Removing and Replacing Print
Cartridges
1.
Open the front cover of the printer.
The print cartridge cradle moves to
the center of the printer.
2.
Push down the wire lever to release
the printer cartridge from the cradle.
3.
Follow steps 3 through 6 in “Install-
ing the Print Cartridges” to install
new print cartridges.