Filter
Top Products
Chapter 1 7
Installation and Setup
Initial Inspection
Initial Inspection
Inspect the shipping container and the cushioning material for signs of stress. Retain the
shipping materials for future use, as you may wish to ship the analyzer to another location
or to Agilent Technologies for service. Verify that the contents of the shipping container are
complete. The following table lists the items shipped with the analyzer.
Item Description
Accessories
IntuiLink Toolbar software, CD-ROM
Provides a set of connectivity tools that enable you to easily
move data from your analyzer to your PC.
Power Cable (See Table 1-2. on page 11) Connection for power source.
Adapter (E4446A and E4448A only) 2.4 mm(f) to K(f) front panel connector adapter, part number
1250-2187
Adapter (E4446A and E4448A only) 2.4 mm(f) to 2.4 mm(f) front panel connector adapter, part
number 1250-2188
Standard Documentation Set
Getting Started Guide Covers unpacking and setting up the analyzer, analyzer
features, and how to make a basic measurement. Includes
information on options and accessories, and what to do if you
have a problem.
User’s and Programmer’s Reference Describes analyzer features in detail, including front-panel
key descriptions, basic spectrum analyzer programming
information, and SCPI command descriptions.
Measurement Guide Provides details on how to measure various signals, and how
to use catalogs and files.
Specifications Guide Documents specifications, safety, and regulatory information.
Instrument Messages and Functional Tests Includes instrument messages (and suggestions for
troubleshooting them), and manual functional tests.
Programming Conversion Guide Describes SCPI programming command compatibility for
8590, 8560, 8566, ESA/PSA series analyzers.
Documentation CD-ROM Includes the documents in the standard set (listed above).
You can view and print the information as needed. See the
CD-ROM jacket for installation information.
NOTE If you purchased one or more optional measurement personalities, the related guides for the
options you ordered are included.
Service documentation is not included in the standard documentation set. See “Options” on
page 61 for information on ordering.