Filter
Top Products
Chapter 6 73
In Case of Difficulty
Before Calling Agilent Technologies
❏ Perform an Alignment. Press System, Alignments, Align Now, All.
❏ If the previously performed alignments did not resolve the problem, press
System,
Alignments, Restore Align Defaults. Then press System, Alignments, Align All Now.
❏ Is the analyzer displaying an error message? If so, refer to the Instrument Messages
and Functional Tests manual.
❏ If the necessary equipment is available, perform the functional tests in the Instrument
Messages and Functional Tests document for your analyzer.
❏ If the 10 MHz output is not functioning, verify that it is turned on by pressing
System,
Reference, 10 MHz to select On.
TIP You can get automatic electronic notification of new firmware releases and
other product updates/information by subscribing to the Agilent Technologies
Test & Measurement E-Mail Notification Service for the PSA or ESA Series at
http://wwwdb.tm.agilent.com/cgi-bin/notification/user.pl