Filter
Top Products
Cause: The print cartridges needed to be cleaned or there was insufficient ink.
Errors
If the product has an error, the lights on the product might flash, or an error message
might appear on your computer screen.
This section contains the following topics:
•
Flashing lights
•
Product messages
•
File messages
•
General user messages
•
Paper messages
•
Power and connection messages
•
Print cartridge messages
Flashing lights
The lights on the product flash in special sequences to inform you about various error
conditions. Refer to the following table for information on solving your error condition
based on which lights are on or flashing on the product.
Attention
light
Estimate
d Ink
Level
lights
Number
of Copies
display
On light Description Solution
Fast
blinking
All ! fast
blinking
E On Print cartridges are
not installed in the
printer.
Install print
cartridges.
Fast
blinking
On ! Fast
blinking
On The product is out of
paper.
Load paper and press
any button to resume.
The product has a
paper jam.
Clear the paper jam,
and then press any
button to resume.
Fast
blinking
All ! fast
blinking
E On The print carriage is
stalled.
Open the front access
door, and check that
the carriage is not
blocked.
Fast
blinking
Current
ink level
On
E Fast
blinking
Scanner failure Turn off the product,
and then turn it on
again.
If the problem
persists, contact HP
customer support. In
the meantime, you
can continue to use
the product as a
printer.
Chapter 8
80 Solve a problem
Solve a problem