Filter
Top Products
5
Note: The configuration steps detailed in this document are for a switched environment only.
Cable the EVA storage subsystem(s) to the switches or hubs.
Cable the LAN using an Ethernet cable from the public NIC in each cluster node to the public LAN switch or hub.
Gathering Information
The following table provides a checklist for the required input parameters that will facilitate the
operating system and cluster installation. Write the information in the values column next to each item.
Place a checkmark (3) in the box after completing each step.
3
Item Values
Node 1: Node 2:
Node 3: Node 4:
Node 5: Node 6:
Name for each node (Microsoft
Windows Server 2003, Enterprise
Edition supports up to eight (8) nodes
in a cluster):
Node 7: Node 8:
Node 1 Node 2
IP address:
Subnet mask:
IP address:
Subnet mask:
Node 3 Node 4
IP address:
Subnet mask:
IP address:
Subnet mask:
Node 5 Node 6
IP address:
Subnet mask:
IP address:
Subnet mask:
Node 7 Node 8
Public network connection IP address
and subnet mask for each node:
IP address:
Subnet mask:
IP address:
Subnet mask:
Node 1 Node 2
IP address:
Subnet mask:
IP address:
Subnet mask:
Node 3 Node 4
IP address:
Subnet mask:
IP address:
Subnet mask:
Node 5 Node 6
IP address:
Subnet mask:
IP address:
Subnet mask:
Node 7 Node 8
Private network connection (cluster
heartbeat) IP address and subnet mask
for each node:
IP address:
Subnet mask:
IP address:
Subnet mask: