Filter
Top Products
10
Card Stock
Considerations
•
••
•
C-size flutes or smaller sizes perform best
•
••
•
Certain coated sheets may cause ink to pool and cure unevenly, yielding a poor image quality
print. Be sure to test coated materials for compatibility before purchasing significant quantities.
•
••
•
Supported (
)
print modes and resolutions:
Recommendations for best results
Preparation
•
••
•
Clean with a lint-free cloth to remove any dust and handle with gloves to avoid fingerprints on the
edge of the media. Although not always visible, oils from your fingers may still mar surface and
affect image quality. Since the material creases easily watch for edges that may strike the carriage.
•
••
•
Larger flute sizes on corrugated stock can inhibit media feed. Only C flutes and smaller sizes are
recommended.
Printing
•
••
•
Depending on ink coverage and image content, all modes may print acceptably. Solid colors look
best in High Quality Mode or 600x600.
•
••
•
UV Lamps: Use the low UV lamp power setting.
•
••
•
Depending on thickness vacuum may need to be increased or decreased, a setting of 5 is a good
balance allowing for good feed and preventing puckering of the material.
•
••
•
Select UV Photobase or equivalent color profiles
Output Handling
•
••
•
If tape is necessary, use low-tack tape that is easy to remove. Pull it off slowly to avoid removing
the top layer of coated paper. Again, this media creases easily, especially in printed areas, as ink
increases stiffness. Take care when lifting it off table to avoid creases.
1200x600 600x600 600x300
HQ Prod
BB HQ Prod
BB HQ Prod BB