Filter
Top Products
Installing the Adapter
18 FCA2214/FCA2214DC PCI-X Host Bus Adapters for Linux, NetWare, and Windows Installation
Guide
Installation Prerequisites
Before you begin, make sure you have the following:
■ A screwdriver (Phillips #1).
■ An optical multimode cable with an LC-style duplex connector.
■ Each HBA has a unique serial number that is located on the bottom of the
adapter. Check the HBA and record its serial number, in the unlikely event
that the NVRAM is corrupted.
Adapter Components
Figure 1 shows the HBA components that are referenced throughout this chapter.
Figure 1: Adapter Components
1. LED Indicators
2. J1 Connector
3. J3 Jumpers
1
2
3