Filter
Top Products
Fast!UTIL
48 FCA2214/FCA2214DC PCI-X Host Bus Adapters for Linux, NetWare, and Windows Installation
Guide
Extended Firmware Settings
From the Configuration Settings menu in Fast!UTIL, select Extended
Firmware Settings. Table 8 lists the default settings for the HBA:
Table 8: Extended Firmware Settings
Setting Options Default
Extended Control Block Enabled, Disabled Enabled
RIO Operation Mode 0, 1, 2, 3, 4 0
Connection Options 0, 1, 2 2
Class 2 Service Enabled, Disabled Disabled
ACK0 Enabled, Disabled Disabled
Fibre Channel Tape Support Enabled, Disabled Enabled
Fibre Channel Confirm Enabled, Disabled Enabled
Command Reference Number Enabled, Disabled Disabled
Read Transfer Ready Enabled, Disabled Disabled
Response Timer 0–255 0
Interrupt Delay Timer 0–255 0
Data Rate 0, 1, 2 2