Filter
Top Products
Hard drive
NOTE: The hard drive spare part kit includes the hard drive bracket and screws.
Description Spare part number
500-GB, 7200-rpm hard drive 519527-001
500-GB, 5400-rpm hard drive 515870-001
320-GB, 7200-rpm hard drive 493997-001
250-GB, 7200-rpm hard drive 493996-001
250-GB, 5400-rpm hard drive 493994-001
160-GB, 7200-rpm hard drive 493992-001
160-GB, 5400-rpm hard drive 493991-001
80-GB, solid state drive 493998-001
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 41).
Remove the hard drive:
1. Position the computer with the front toward you.
2. Loosen the two Phillips PM2.0×5.0 captive screws (1) that secure the hard drive cover to the
computer.
Component replacement procedures 45