Setting Up the Monitor
User’s Guide 3–7
Connecting the Monitor
To connect the monitor video input to the computer:
1. Place the monitor upright as shown in the following illustration.
2. Connect the video cable from the monitor to the video
connector on the rear panel of the computer.
✎
You can connect the VGA cable, the DVI-D cable, or both. Only
one cable is connected for typical installations.
❏ Connect one end of the 15-pin VGA cable to the VGA
input connector on the monitor. Then connect the other
end to the VGA output connector on the computer.
Connecting the VGA Cable
TV-OUT
LCD
VGA