Filter
Top Products
8
Analyzing the PCI Local Bus
This chapter introduces you to the PCI Scope Preprocessor and
lists the minimum equipment required and accessories supplied
for PCI Local Bus analysis.
Before you use the PCI Preprocessor software, make a
duplicate copy of the master diskette. Then store the master
diskette and use the back-up copy to configure your logic
analysis system. This will help prevent the possibility of losing
or destroying the original files in the event the diskette wears
out, is damaged, or a file is accidentally deleted.
To make a duplicate copy, use the Duplicate Diskette operation
in the disk menu of your logic analyzer. For more information,
refer to the reference manual for the HP16500B mainframe.
The PCI Scope Preprocessor product consists of the following
accessories:
• The PCI Scope interface hardware, which includes the
interface circuit module.
• The MultiProbe configuration software on a 3.5 inch
diskette.
• This operating manual
The minimum equipment required for complete analysis of a
PCI Local Bus consists of the following equipment:
• An HP16500B based Logic Analyzer
• An HP 16535A MultiProbe Control Module
• A 208 pin MultiProbe Pod (HP part number E5322A)
Duplicating the
Master Diskette
Accessories Supplied
Minimum Equipment
Required