Filter
Top Products
8. Disconnect the camera module cable (3) from the camera module.
Reverse this procedure to install the camera module.
Top cover
Description Spare part number
Top cover for use only in computer models not equipped with a Web camera (includes TouchPad and
cable)
454936-001
Top cover for use only in computer models equipped with a Web camera (includes TouchPad and
cable)
466649-001
Before removing the top cover, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 40).
5.
Remove the following components:
a.
Hard drive (see
Hard drive on page 41)
b.
Optical drive (see
Optical drive on page 48)
c.
Keyboard (see
Keyboard on page 50)
d.
Switch cover (see
Switch cover on page 53)
e.
Display assembly (see
Display assembly on page 55)
62 Chapter 4 Removal and replacement procedures