Filter
Top Products
Features List
One piece rack mount PDUs
Industry standard button and keyhole mounting
Easily accessible outlet receptacles and improved cable management
Models range from 1.9kVA to 19.9kVA
Key Features
Ultra-thin design does not interfere with rear maintenance
1U/0U and vertical form factors with flexible mounting options
Easy drop in installation
Multiple models for
flexible installation
The HP Basic PDUs is available in four form factors for a variety of racks and environments. All HP Basic
PDUs can be mounted to stay completely out of the critical rear maintenance path needed to service IT
equipment in the rack. All vertical models use industry standard button and keyhole mounting for simple
drop in installation in HP 11000 G2 and Intelligent Series racks and many third party racks.
1U/0U Basic PDUs
Mounts in 1U of space in any EIA standard rack these PDUs can also mount in the side of an HP rack for 0U
mounting. Available in either a low voltage model with twelve NEMA 5-20 receptacles or a high voltage
model with twelve IEC C13 outlets.
Vertical Basic PDUs
A variety of sizes meet the needs of many environments
Mounts vertically on either side in the rear of the rack using industry standard button and keyhole
mounting.
Standard mounting faces the outlet towards the rear of the rack. This configuration fully prevents
interference in the maintenance zone between rear RETMA rails.
Using the optional configuration of facing the outlets into the rack, multiple PDUs can be mounted
on one side of the rack for higher power density.*
NOTE:
Facing the outlets into the rack will interfere with the lower few rack U spaces of the rear
maintenance zone due to breakers on the PDUs.
QuickSpecs
HP Basic Power Distribution Units
Standard Features
DA - 14557 North America — Version 7 — October 1, 2013
Page 4