Filter
Top Products
Installing the A6828A Adapter
Verifying Installation
Chapter 2 57
TIP When the system boots after installation, the insf command creates the
proper device files for the “ctl” interfaces (which are usually adapters)
and the SCSI devices attached to the A6828A adapter. Sometimes,
though, it does not create all of the needed device files.
One situation when this happens is when you attach SCSI disks to the
adapter after the system boots and the adapter is already installed in the
system.
In the ioscan output, if you see a SCSI device listed without the second
line, that means you are missing that device’s device files. To fix the
problem, issue the insf -e command, which creates all of the device
files.
For more information on the ioscan command, see the ioscan(1M) man
page.
Refer to your system documentation for information on verifying system
operation.