Filter
Top Products
Troubleshooting
Setting and Confirming SCSI Parameters
Chapter 370
Setting and Confirming SCSI Parameters
You can ensure compatibility between the SCSI controller and SCSI
devices using the commands available for setting and displaying the
appropriate SCSI bus parameters, including SCSI IDs.
The procedure varies depending on which system the HP A6828A host
bus adapter is installed in.
For HP A6828A host bus adapters installed in PA-RISC based systems,
see “Setting and Confirming SCSI Parameters for HP A6828A Host Bus
Adapters Installed in PA-RISC Based Systems” on page 71.
For HP A6828A host bus adapters installed in Itanium-based systems,
see “Setting and Confirming SCSI Parameters for HP A6828A Host Bus
Adapter Installed in Itanium‚-Based Systems” on page 76.