HP (Hewlett-Packard) HP D2842A Personal Computer User Manual


 
English 7
HP 19” Color Monitor User’s Guide
Using Your Monitor
Adjusting the Shape the Displayed Image
To adjust the shape of the displayed image:
1 Select and press to enter the
GEOMETRY
sub-menu.
2 Select the feature you wish to modify using the and adjustment
controls, then press to confirm your selection.
The following table lists the adjustment options available:
3 Use the and adjustment controls to make your adjustments.
4 Press to exit.
NOTE To revert to the default shape settings of the displayed image, select from
this sub-menu.
Adjustment Menu Item Use to Adjust the displayed image
PINCUSHION If the vertical edges appear to bow in or out.
TRAPEZOID If the vertical edges do not appear parallel.
PIN BALANCE If the vertical edges appear to bow to the left or right.
PARALLELOGRAM If the vertical edges appear to be tilted to the left or right.
PIN S ADJUST If the vertical edges appear to have an irregular distortion.
PIN W ADJUST If the vertical edges appear to have an irregular distortion.
GEOMETRY
91.1kHz/85Hz
ENTER:
SEL:
ETC
OSD
PINCUSHION
91.1kHz/85Hz
ENTER:
SEL:
andros.bk : andr-us.fb4 Page 7 Monday, December 21, 1998 3:51 PM