Filter
Top Products
Section 1 – Printing Basics
6
Replacing and Maintaining
Print Cartridges
Replacing A Print Cartridge
Do not remove an empty print cartridge until you are ready to replace it. If one print cartridge
is empty, the other cartridge will still print. However, the printer will not print unless both
cartridges are in place. See “Ordering Parts and Accessories” in this User’s Guide for print
cartridge part numbers and ordering information.
1 Turn on the printer, and then open the top cover.
The print cartridge cradles move to the center of the printer, and the resume light flashes.
2 Lift up the print cartridge latch, grasp the top of the print cartridge, and pull it up and out of its cradle.
Caution
Keep new and used print cartridges out of the reach of children.
3 Remove the new print cartridge from its package and gently remove any
tape covering the ink nozzles, being careful not to touch the ink nozzles
or the gold-colored contacts.
To get the best print quality, make sure the print cartridges are at
room temperature before you install them.
4 Push the new cartridge down firmly into its cradle slot and close the print cartridge latch.
5 Close the printer’s top cover.
The cartridges return to their “home” position on the right side of the printer, and the
resume light stops flashing.
NOTE
NOTE
NOTE
WW US eng. Manual 21.07.1997 03.28 pm Page 6