Filter
Top Products
Technical specifications 28
Category Specification
Number of ports per
switch:
16 x 1000-Mb/s ports dedicated to server blade for switch communications
2 x 1000-Mb/s ports dedicated to communications between switches that are
inserted in 1 and 2, 3 and 4, 5 and 6, or 7 and 8
5 x 10Base-T/100Base-TX/1000Base-T RJ-45 ports
1 x serial RS-232 DB-9 rear panel management serial port
Runtime switching software default settings
General default settings
Setting Value
Notice None
Banner None
User names and
passwords
User names and passwords:
• user—Enabled, password is user
• oper—Disabled, no password
• admin—Enabled (cannot be disabled), password is admin
BOOTP service Enabled
IP address (if manual IP
option is selected)
0.0.0.0
Subnet mask (if manual IP
option is selected)
0.0.0.0
Primary default gateway 0.0.0.0
Secondary default
gateway
0.0.0.0
Primary DNS server
address
0.0.0.0
Secondary DNS server
address
0.0.0.0
Default domain name None
Management
network/mask
0.0.0.0 / 0.0.0.0
Switch software image on
next boot
Image 1
Switch Config file on next
boot
Active
Display Hostname
(sysName) in CLI prompt
Disabled
Idle timeout 5 minutes
Telnet status Enabled
Telnet port 23
Web status Enabled
Web port 80