Filter
Top Products
RJ-45 pin specification 46
RJ-45 pin specification
In this section
Standard RJ-45 receptacle/connector ....................................................................................................... 46
Standard RJ-45 receptacle/connector
When connecting the switch to a switch, bridge, or hub, an Ethernet cable is necessary.
The table indicates the pin number and wire color assignments for the switch-to-network adapter card
connection, and the Ethernet cable for the switch-to-switch, switch-to-hub, or switch-to-bridge connection.
Contact Media direct interface signal Color match
1 Tx + (transmit) White/Orange
2 Tx - (transmit) Orange/White
3 Rx + (receive) White/Green
4 Not used Blue/White
5 Not used White/Blue
6 Rx - (receive) Green/White
7 Not used White/Brown
8 Not used Brown/White
The table provides the same information for the Gigabit over Copper ports.
Contact Media direct interface signal Color match
1 BI_DA+ White/Orange
2 BI_DA- Orange/White
3 BI_DB+ White/Green
4 BI_DC+ Blue/White
5 BI_DC- White/Blue
6 BI_DB- Green/White
7 BI_DD+ White/Brown
8 BI_DD- Brown/White