HP (Hewlett-Packard) HP GbE2c Network Card User Manual


 
Technical specifications 29
Setting Value
Backpressure Disabled
Port state Enabled
Port speed/duplex Auto
Flow control Receive & transmit
STP STG 1—Enabled with default VLAN (VID=1)
Port 1-16 (server ports) STP—Disabled at port level
STG 2-16—Disabled
Bridge Max Age 20 seconds
Bridge Hello Time 2 seconds
Bridge Forward Delay 15 seconds
Bridge Priority 32768
MAC Address Aging Time 300 seconds
Port Priority 128
Path Cost 4
Static VLAN Entry Default VLAN (VID = 1)
Port VID 1 for all ports
Port Trunking Trunk group 1, enabled with port 17 and 18
Port Trunking Load Sharing
Algorithm
The algorithm selects the following as forwarding ports for forwarding traffic:
1 For forwarding IP Packets—modulus of XOR of last 3 bits of source and last 3
bits of Destination IP address
2 For forwarding non-IP packets—modulus of XOR of last 3 bits of source and
last 3 bits of Destination MAC address
3 For forwarding broadcast, multicast packets, and unknown unicast packets—
the lowest active port number in the trunk group
Port Mirroring-Mirror Status Disabled
Port Mirroring-Mirror Port None selected
Port Mirroring-Mirror Port
Traffic Direction
None selected
Port Mirroring-Monitoring
Port
None selected
SNMP Read/write
SNMP System Name None
SNMP System Location None
SNMP System Contact None
SNMP Community
String/Access Right
Public—read-only
Private—read/write
SNMP Trap Host 1 0.0.0.0
SNMP Trap Host 1
Community String
Public
SNMP Trap Host 2 0.0.0.0
SNMP Trap Host 2
Community String
Public