Filter
Top Products
EN
Chapter 2 43
Setting the I/O Timeout
I/O Timeout sets the number of seconds that the printer waits to
receive additional data from the computer before switching I/O ports.
The default setting for the printer is 15 seconds.
Note Setting the I/O Timeout too high may cause a single I/O port to remain
active and prohibit data from being received through other ports.
Setting I/O Timeout too low may result in missing characters, out-of-
order print jobs, or other print problems.
To set the I/O Timeout
1 Press M
ENU
until I/O MENU displays.
2 Press I
TEM
until I/O TIMEOUT displays.
3 Press V
ALUE
to increase or decrease the I/O Timeout value.
Holding the key down will change the value more quickly.
4 Press S
ELECT
to save the setting.
5 Press G
O
to return the printer to the READY state.