Filter
Top Products
Removal and replacement procedures 51
2. Remove the server from the rack (on page 26).
3. Remove the access panel ("Access panel" on page 27).
4. Remove the PCI riser board assembly ("PCI riser board assembly" on page 39).
5. Remove all DIMMs ("DIMMs" on page 42).
6. Remove the air baffle ("Air baffle" on page 29).
7. Remove the fan assembly ("Fan assembly" on page 30).
8. Disconnect the power supply cables from the system board.
9. Disconnect the SATA hard drive cables from the system board ("Cabling" on page 58, "Server cable
routing" on page 58).
10. Disconnect the media cage cables and the power button/LED board cable from the system board.
11. Remove the heatsink ("Heatsink" on page 44).
12. Open the processor retaining latch and the processor socket retaining bracket on the failed system
board.