Filter
Top Products
2
Load originals and load paper
This chapter provides instructions for loading originals on the glass to copy or scan,
choosing the best paper type for your job, loading paper in the paper tray, and
avoiding paper jams.
Load an original
You can copy or scan up to letter- or A4-size originals by loading them on the glass.
Note Many of the special features will not work correctly if the glass and lid
backing are not clean. For more information, see Clean the HP All-in-One.
1. Lift the lid and place your original face down on the left front corner of the glass.
2. Close the lid.
Choose papers for printing and copying
You can use many types and sizes of paper in your HP All-in-One. Review the
following recommendations to get the best printing and copying quality. Whenever you
change paper types or sizes, remember to change those settings.
Recommended papers
For the best print quality, use HP papers that are specifically designed for the type of
project you are printing. If you are printing photos, for example, load glossy or matte
photo paper in the paper tray. If you are printing a brochure or presentation, use a
type of paper specifically designed for that purpose.
For more information about HP papers, see the onscreen HP Image Zone Help, or go
to www.hp.com/support/inkjet_media.
Note At this time, this portion of the site is available in English only.
Papers to avoid
Using inappropriate papers can cause paper jams or poor print quality.
User Guide 9
Load originals and load paper