Filter
Top Products
Disks and File Systems Configuration (fsweb)
Table 2-4 SAM-SMH Mapping – Disks and File Systems Configuration
Using HP SMH TUIUsing HP SMH GUIUsing SAMTask
#smh
f > d > Select disk > Enter
1. Tools
2. Disks and File Systems
3. Disks
4. Select a device
1. SAM Areas
2. Disks and File
Systems
3. Disk Devices
4. Select device
5. Actions
6. View More
InformationUser
Viewing details of
disk device
#smh
f > d > Select disk > Enter
> a
1. Tools
2. Disks and File Systems
3. Disks
4. Select a device
5. Set LUN Attributes
1. SAM Areas
2. Disks and File
Systems
3. Disk Devices
4. Select device
5. Actions
6. Configure
7. Using the Logical
Volume Manager
Configuring disk
device using the
Logical Volume
Manager
#smh
f > h|v|c > Select unused
disk
1. Tools
2. Disks and File Systems
3. File Systems
4. Add File System
5. Add HFS | VxFS
6. Select unused disk
1. SAM Areas
2. Disks and File
Systems
3. Disk Devices
4. Select device
5. Actions
6. Configure
7. Not using the
Logical Volume
Manager
Configuring disk
device not using
the Logical Volume
Manager
#smh
f > d > Select disk > Enter
> m
1. Tools
2. Disks and File Systems
3. Disks
4. Select a device
5. Mark Disk as Used
1. SAM Areas
2. Disks and File
Systems
3. Disk Devices
4. Select device
5. Actions
6. Mark Disk as Used
Marking disk as
used
#smh
f > d > Select disk > Enter
> i
1. Tools
2. Disks and File Systems
3. Disks
4. Select a device
5. Set Device Identifier
1. SAM Areas
2. Disks and File
Systems
3. Disk Devices
4. Select device
5. Actions
6. Annotate Device
Annotating a
device
Currently not supported
1. Tools
2. Disks and File Systems
3. Disks
4. Veritas Enterprise Administrator
1. SAM Areas
2. Disks and File
Systems
3. Disk Devices
4. Actions
5. Run Veritas
Enterprise
Administrator
Opening Veritas
Enterprise
Administrator
Disks and File Systems Configuration (fsweb) 23