Filter
Top Products
Troubleshooting
Diagnostic Flowcharts
Chapter 4
39
Flowchart 3b (continued) Procedures
• If network unreachable error, go to Configuration Tests.
• If there is no response from ping, and using jumbo frames, validate that switches in
the path support jumbo frames, making sure path MTU is 9000 from source host to
destination host. Otherwise, reconfigure network path and repeat ping Test. If not
using jumbo frames, or switches and path MTU are set for jumbo frames (9000
bytes), go to Cable and LED Test.
• If you receive an unknown host error, add missing host name and repeat ping Test.
• If you receive “error=SendTo: No route to host,” use route(1M) to add route table
entry for missing host and repeat ping Test. Otherwise, call your HP representative.