Filter
Top Products
Descriptions of the Paper (Media) Source, Output Bin, and
Alphanumeric ID commands are provided below.
Paper (Media) Source
Command
The Paper (Media) Source command selects the specified
input media source. Parameters have been added to enable
printing from the LaserJet 5Si/5SiMx printer trays.
?&l#H
# = 0 - Print current page (source is unchanged)
1 - Tray 2 (upper drawer)
2 - Manual feed (tray 1, right side tray)
3 - Manual envelope feed (tray 1, right tray)
4 - Tray 3 (lower drawer)
5 - High Capacity Input (HCI), first tray
6 - Optional envelope feeder
7 - Autoselect
8 - Tray 1 (right side tray)
20 - 39 - High Capacity Input (HCI) trays 2- 21
Default = 7
Range = 0 to 8, 20 - 39
Feature Status Comments
Paper (Media) Source
Modified Additional parameters have been added to provide support
for Tray 1, the printer’s right side multi-purpose tray and
the other optional trays (see the description of this
command in the following paragraphs).
Output Bin
Modified The Output Bin command (?&l#G) selects the destination
bin for the print job.
Alphanumeric ID
New Specifies alphanumeric String IDs for selecting and
manipulating fonts, macros, and media types. Specifies
media selection by the type of media and supports
enhancements for the printer disk drive.
Table 2-15. PCL Feature Additions for HP LaserJet 5Si/5SiMx Printers
2-76 Printer-Specific Differences