Filter
Top Products
OptiPrinter PRO CD/DVD Inkjet Printer
ZZ 004 821 - 16 -
To ensure that your image is positioned correctly, select “Test Print”.
A series of black circles will print onto the CD as shown in Fig. 15
You may find that the circles do not print centrally onto the disc as shown in Fig. 16, in which case you
need to adjust the position of the template in Discus.
Use the nudge keys (as shown in Fig. 14 on the previous page) to move your template back & forth
and up & down until your test prints centrally onto your disc.
Once the test print has been perfected, you are now ready to print the artwork you created.
Place a blank CD into the CD tray. On the print tab, select “Print”. Ensure that the OptiPrinter PRO has
been selected from the Print Properties and select “Print” again. Your OptiPrinter PRO will begin to
print your disc.
Note:
The printing surface on printable discs sometimes differs from manufacturer to manufacturer.
Use the Diameter Adjuster (see Fig.14 on previous page) to alter the printable area of our disc.
Fig. 15 Fig. 16