HP (Hewlett-Packard) LP145N All in One Printer User Manual


 
Appendix
142
10
Transmittable Distance:
1 Mbps 400 m
*1
2 Mbps 270 m
*1
5.5 Mbps 200 m
*1
11 Mbps 140 m
*1
*1
These figures are a guideline for outdoor use. In general, the transmittable dis-
tance indoors is 10-100 m, depending on the environment.
Transmission Mode:
ad hoc mode and infrastructure mode
IEEE 1284 Interface Board Type A
Transmission Spec.:
IEEE 1284
Required cable:
Standard IEEE 1284 compliant Micro Centronics 36 pin cable
Gigabit Ethernet Board Type A
Interface Connector:
Ethernet (10Base-T, 100Base-TX, 1000Base-T)
•USB 2.0
It requires a USB computer port and cable that support USB 2.0.
Data Transmission Speed:
Ethernet: 1000 Mbps, 100 Mbps, 10 Mbps
USB: 480 Mbps (High speed: USB 2.0), 12 Mbps (Full speed)
Protocol:
TCP/IP, IPX/SPX, AppleTalk
Distance Between Devices:
Ethernet: 100 m
•USB: 5 m