Filter
Top Products
Chapter 6 Installing an Additional Processor
50
Terminator
ZIF
Lever
Processor
Socket
Figure 6-3. Removing the Terminator
NOTE Retain the terminator for future use. The Netserver will not
operate properly if using only one processor with no terminator
installed in the second processor socket.
9. Lift the terminator out of the socket and place it on anti-static surface or bag.
10. Align the second processor over the empty processor socket.
The socket has a triangle marking for pin-1 that should match the triangle for
pin-1 on the processor near the end of the ZIF lever. See Figure 6-4.