Filter
Top Products
Send faxes internationally
To send a fax to an international destination, dial manually to allow for pauses and international dialing
codes.
Receive a fax
Print a fax
When the product receives a fax transmission, it prints the fax (unless the private-receive feature is
enabled) and also stores it automatically to flash memory.
Print a stored fax when the private receive feature is on
To print stored faxes, you must provide the private-receive PIN. After the product prints the stored faxes,
the faxes are deleted from memory.
1. On the control panel, press the Fax Menu
button.
2. Use the arrow buttons to select the Receive Options menu, and then press the OK button.
3. Use the arrow buttons to select the Print Faxes option, and then press the OK button.
4. Use the keypad to enter the product security PIN, and then press the OK button.
5. Use the arrow buttons to select the Private Receive menu, and then press the OK button.
Reprint a fax
If you want to reprint a fax because the print cartridge was empty or if the fax was printed on the wrong
type of media, you can try to reprint it. The amount of memory that is available determines the actual
number of faxes that are stored for reprinting. The most recent fax prints first; the oldest fax that is in
storage prints last.
These faxes are stored continuously. Reprinting them does not clear them from the memory.
1. On the control panel, press the Fax Menu
button.
2. Use the arrow buttons to select the Receive Options menu, and then press OK.
3. Use the arrow buttons to select Print Faxes, and then press OK. The product begins reprinting the
most recently printed fax.
NOTE: To stop the printing at any time, press the Cancel button.
CAUTION: If the Allow Reprint setting is set to Off, misprinted or faded faxes cannot be reprinted.
Automatically print on both sides of received faxes
1. On the control panel, press the Setup button.
2. Use the arrow buttons to select the Fax Setup menu, and then press the OK button.
3. Use the arrow buttons to select the Advanced Setup menu, and then press the OK button.
4. Use the arrow buttons to select the Print Duplex option, and then press the OK button.
5. Use the arrow buttons to select the On or Off option, and then press the OK button.
ENWW Use fax 141