HP (Hewlett-Packard) M1530 All in One Printer User Manual


 
Use HP Web Jetadmin software
HP Web Jetadmin is a Web-based software solution for remotely installing, monitoring, and
troubleshooting network-connected peripherals. Management is proactive, allowing network
administrators the ability to resolve issues before users are affected. Download this free, enhanced-
management software at
www.hp.com/go/webjetadmin.
Device plug-ins can be installed into HP Web Jetadmin to provide support for specific product features.
The HP Web Jetadmin software can automatically notify you when new plug-ins are available. On the
Product Update page, follow the directions to automatically connect to the HP Web site and install the
latest device plug-ins for your product.
NOTE: Browsers must be Java™-enabled. Browsing from a Mac OS is not supported.
Product security features
The product includes a password feature that restricts access to setup features while allowing basic
functions to continue. The password can be set from the EWS or the control panel.
Private receive can be used to store faxes on the product until you are at the product to print them.
Assign a system password through the product control panel
1. On the control panel, press the Setup button.
2. Use the arrow buttons to select the System Setup menu, and then press the OK button.
3. Use the arrow buttons to select the Product Security item, and then press the OK button.
4. Use the arrow buttons to select the On option, and then press the OK button.
5. Use the keypad to type a password, and then press the OK button.
Assign a system password through the EWS
Assign a password for the product so that unauthorized users cannot change the product settings.
1. Open the HP Embedded Web Server by entering the product IP address into the address line of
a Web browser.
2. Click the Settings tab.
3. On the left side of the window, click the Security menu.
4. In the Device Security Settings area, click the Configure . . . button.
5. In the Device Password area, type the password in the New Password box, and type it again in
the Verify password box.
6. Click the Apply button. Make note of the password and store it in a safe place.
ENWW Use HP Web Jetadmin software 183