Filter
Top Products
User’s Guide 41
Adjusting the Projector
Tint Shifts colors toward red or green.
Red Adjusts the amount of red in the picture.
Green Adjusts the amount of green in the picture.
Blue Adjusts the amount of blue in the picture.
Color space For certain component inputs, selects the type of
signal encoding used by the input source. You can
override the selection made by the projector.
Reset color settings Resets these color settings to their default settings.
Shape settings... Adjusts the shape of the picture.
Keystone Corrects the slanted sides of an image.
Reset keystone Resets keystone correction to zero.
Widescreen input Sets whether a widescreen (16:9) input device is in
use.
VGA settings... Adjusts settings for the VGA input port.
Auto-sync Resynchronizes the projector to the input signal from
a computer. This can compensate for any change in
the signal.
Frequency Adjusts the timing of the projector relative to a
computer graphics card.
Tracking Synchronizes the projector to a computer graphics
card.
Vertical offset Shifts the image up or down within the projection
area.
Horizontal offset Shifts the image left or right within the projection
area.
Reset video settings Resets all video settings to default settings.
Adjust picture (continued)