![](http://pdfasset.owneriq.net/9/ae/9aef8575-f183-4807-b051-b181c5d129b5/9aef8575-f183-4807-b051-b181c5d129b5-bg62.png)
5–8 Maintenance and Service Guide
Removal and Replacement Procedures
5. Loosen the Phillips PM2.5×13.0 spring-loaded hard drive
retention screw 1.
6. Grasp the mylar tab 2 on the left side of the hard drive and
slide the hard drive to the right 3 to disconnect it from the
system board.
7. Remove the hard drive 4 from the hard drive bay.
Removing the Hard Drive