Filter
Top Products
3-6
Introduction to HP Hub & Switch Management
What HP Devices Can Be Managed
Introduction to HP Hub &
Switch Management
Note: HP AdvanceStack hubs can be chained together on a non-
network connection called a Distributed Management Chain. For Hub
& Switch Management to access a chain of AdvanceStack hubs, at least
one hub in the chain must contain an SNMP module. Chained hubs
must be of the same media type (100VG or 10Base-T). For more
information, refer to the device’s installation and reference manual.
For general management of generic SNMP devices (from HP and other
vendors), use the HP OpenView Network Node Manager functions (such as
SNMP Configuration and SNMP MIB Browser).
Note 1
Optional SNMP module for HP 100 VG hubs is J2414A or J2414B
Note 2
Optional SNMP module for 10Base-T hubs is J2603A/B. HP AdvanceStack 10Base-T hubs provided
with SNMP module preinstalled include: HP J2630A (12-port), HP J2631A/B (24-port), HP J2632A/B (48-
port).
Note 3
SNMP module J3133A available for J2610B and J2611B.
Note 4
HP J2980A 10/100 LAN Switch-16 is not supported on IPX networks. To discover this device on an
IP network, the SNMP community name “public” must be configured on the device. 100VG module J2981A
and 100BaseTX module J2984A available for HP J2980A.
Note 5
No IPX Network Management support.
Note 6
Requires Management Module J3178A.
Note 7
Requires Management Module J3210A.
Note 8
No Closeup View provided. Use telnet.
Table 3-1. HP Devices That Can be Managed