Filter
Top Products
1 Connecting to a Netware 3.12 Server
Windows for Workgroups Version 3.11
7 Remove the Intel drivers diskette and reboot the machine, and boot to a
DOS prompt.
8 Insert Netware Client for DOS and Windows Disk 1 and execute
“A:\INSTALL.”
9 Change the settings to match the following and then option 6 to continue
the installation.
• C:\NWCLIENT
•YES
•YES
• C:\WINDOWS
•No
• Intel EtherExpress ™ Pro/10 LAN Adapter (Use the driver from the driv-
ers disk at A:\)
10 Insert the corresponding diskettes to finish the file transfer, and then
reboot the machine.
11 After windows loads, open the “NETWORK” folder, and double-click the
“NETWORK SETUP” icon.
12 Select the “Networks” button in the “Network Setup” and verify that
“Novell NetWare (Workstation Shell 4.0 and above)” is listed under
“Install Windows Support for the following network only:”
13 Click on “OK” twice to complete the installation.