Filter
Top Products
92 Appendix B Paper specifications
EN
Labels
Label construction
When selecting labels, consider the quality of each component:
●
Adhesives: The adhesive material should be stable at 392 °F
(200 °C), the printer’s maximum temperature.
●
Arrangement: Only use labels with no exposed backing between
them. Labels can peel off sheets with spaces between the labels,
causing serious jams.
●
Curl: Prior to printing, labels must lie flat with no more than 13
mm (0.5 in.) of curl in any direction.
●
Condition: Do not use labels with wrinkles, bubbles, or other
indications of separation.
Transparencies
Transparencies used in the printer must be able to withstand 392 °F
(200 °C), the printer’s maximum temperature.