Filter
Top Products
Specifications
Line Interface
A-6
Line Interface
Port Configurations
WARNING To ensure the Electromagnetic Compatibility (EMC) of MPEGscope, use shielded
cables on all interfaces.
SPI ASI M2S DHEI
Type 8–bit parallel serial serial serial
Maximum line rate 108 Mb/s 216 Mb/s 216 Mb/s 40 Mb/s
Timestamps Packet timestamp clock:
10 MHz +/- 5 ppm
Resolution of timestamp
clock: 100 ns
Packet timestamp
sampling is accurate to
within +/- 1 timestamp
clock period between
consecutive packets
Packet timestamp clock:
33 MHz +/- 5 ppm
Resolution of timestamp
clock: 30 ns
Packet timestamp
sampling is accurate to
within +/- 1 timestamp
clock period between
consecutive packets
Packet timestamp clock:
33 MHz +/- 5 ppm
Resolution of timestamp
clock: 30 ns
Packet timestamp
sampling is accurate to
within +/- 1 timestamp
clock period between
consecutive packets
Packet timestamp clock:
33 MHz +/- 5 ppm
Resolution of timestamp
clock: 30 ns
Packet timestamp
sampling is accurate to
within +/- 1 timestamp
clock period between
consecutive packets
Electrical Spec EIA/TIA-644 (LVDS) 75 Ω coax 50 Ω coax Balanced ECL
Connector Type DB-25 (through adapter) BNC SMA/SMB
(through adapter)
DB-25
Standard EN 50083–9
“Interfaces for
CATV/SMATV Headends
and similar Professional
Equipment”
EN 50083–9
“Interfaces for
CATV/SMATV Headends
and similar Professional
Equipment”
“Using the DiviCom M2S
Interface”—DiviCom
Application Note 0002
SCTE DVS/110
4 September 1997
Response to SCTE DVS
CFI (DVS/089R1):
Cable Headend and
Distribution Systems
Part Number N/A ASI and Serial ECL (DHEI) interface: E6291A