Filter
Top Products
RPC SERIES OWNER’S MANUAL
DETAILED OPERATION AND CONFIGURATION
________________________________________________________________________________
27
RPC-2 MD01 AND RPC-2 RDR
LOCAL ACCESS
The RPC-2 MD01 and RPC-2 RDR have an
USING THE EIA-232
RJ-45 port for connecting to a local EIA-232
SERIAL CONNECTION
device, such as a computer terminal or
external modem. Most serial computers do
not have RJ-45 connections; therefore, an
adapter is provided with this unit to convert
from a DE-9 connector to an RJ-45
connector (BayTech Part No. 9FRJ45PC-1).
If you are connecting to a modem, use a
modem adapter (BayTech Part No.
25MRJ45MD-8).
BayTech also manufactures a
computer/terminal adapter (BayTech Part
No. 25FRJ45PC-1) for converting from a
DB-25 connector to an RJ-45 connector. If
your computer does have an RJ-45
connection, but the pin signals are different
from those described for BayTech on Page
16 of this manual, it is possible for BayTech
to customize an adapter for you. If you
require a different adapter than the one
supplied with this unit, contact one of
BayTech’s Applications Engineers.
Using the 9FRJ45PC-1 adapter (or other
applicable adapter) and the RJ08X007
crossed cable, connect the serial port of your
computer to the RJ-45 port labeled “EIA-
232” on the back of your RPC unit.
Load serial port communications software.
Configure host terminal’s serial
communications parameters to match the
RPC. RPC factory serial communications