Filter
Top Products
RPC SERIES OWNER’S MANUAL
DETAILED OPERATION AND CONFIGURATION
________________________________________________________________________________
48
address is 0.0.0.0.
If you fail to enter the IP
Address in dotted decimal form, the RPC
responds again:
E
nter IP address in dotted decimal form:
The RPC responds indefinitely with the
same request until the IP Address in entered
in the correct form.
Subnet Mask
The Subnet Mask consist of four bytes, each
byte ranging from 0 to 255. This parameter
must be programmed before the RPC can be
accessed on a network.
From the configuration menu, select #2,
“Subnet Mask.” The RPC responds:
Enter Subnet Mask in dotted decimal form:
Enter the Subnet Mask (Example:
255.255.255.0), followed by a carriage
return. Upon entry of a carriage return, the
RPC resumes the configuration menu.
Default Subnet Mask is 0.0.0.0.
If you fail
to enter the subnet mask in dotted decimal
form, the RPC responds again:
Enter Subnet Mask in dotted decimal form:
The RPC responds indefinitely with the
same request until the Subnet Mask is
entered in the correct form.
Gateway
The Gateway address consists of four bytes,
each byte ranging from 0 to 255.
From the configuration menu, select #3,
“Gateway.” The RPC responds:
Enter Gateway address in dotted decimal form: