Filter
Top Products
Step 2: Connect the ADF
1-4
....................................................................................................................................................................................................................................
Step 2: Connect
the ADF
Note
If your ADF came with your scanner, start at
Step 8 on page 1-6.
1
Turn off the scanner by unplugging the power cord
from the electrical outlet.
2
Open the cover.
3
Grasp both sides of the hinged end of the scanner
cover and pull straight up until the cover comes off
the scanner. You may need to move the cover from
side to side to pull it off.
Do not bend the cover too
far back.
Removing the scanner cover
Adf.bk : INSTALL.FM5 Page 4 Sunday, December 21, 1997 4:50 PM