Filter
Top Products
1-5
Step 2: Connect the ADF
....................................................................................................................................................................................................................................
4
Store the cover on a flat, smooth surface in a safe
place. You will not need the scanner cover as long as
the ADF is installed.
5
Hold the ADF with the mounting posts perpendicular
to the scanner.
6
Align the mounting posts with the slots at the rear of
the scanner body. Ensure both posts are in the same
position.
7
Lower the ADF until the mounting posts are seated
firmly in the scanner.
Inserting the ADF
mounting posts
Adf.bk : INSTALL.FM5 Page 5 Sunday, December 21, 1997 4:50 PM