Filter
Top Products
10
Step 3: HP blade PC middleware configuration
The following provides HP blade PC software configuration:
• For the purposes of this white paper, an HP CCI implementation with the hardware and software
components listed in “Reference hardware and software” on page 2 was used.
• Install one of the following ActivCard middleware packages on the HP Blade PCs:
• ActivCard ActivClient v5.4
• ActivCard Gold v2.2
Step 4: Client smart card driver configuration
Configure thin client software (XPe and CE). Detailed instructions for installing drivers on an XPe or CE
image is beyond the scope of this white paper. You can find instructions for XPe at http://
h200001.www2.hp.com/bc/docs/support/SupportManual/c00264469/c00264469.pdf and instruc-
tions for CE http://h200001.www2.hp.com/bc/docs/support/SupportManual/c00234778/
c00234778.pdf.
>> Install the appropriate driver from the list below for the device that you will use.
• HP standard USB Smart Card Keyboard
Driver: HPKBCCID.sys, version 4.28.0.1