Filter
Top Products
Operating the Monitor
User’s Guide 4–13
Energy Saver Feature
When the monitor is in its normal operating mode, the monitor
utilizes less than 40 watts of power and the Power light is green.
The monitor also supports a reduced power state. The reduced
power state will initiate if the monitor detects the absence of
either the horizontal sync signal and/or the vertical sync signal.
Upon detecting the absence of these signals, the monitor screen is
blanked, the backlight is turned off, and the power light flashes
green. When the monitor is in the reduced power state, the
monitor will utilize less than 3 watts of power. There is a brief
warm up period before the monitor will return to its normal
operating mode.
Refer to your computer manual for instructions on setting energy
saver features (sometimes called power management features).
✎
The above energy saver feature only works when connected to
computers that have energy saver features.
Adjusting Screen Quality
The Auto Adjustment feature allows the monitor to self-adjust to
the incoming video signal. To adjust, press the Auto button on the
front panel of the monitor. To improve the results of
auto-adjustment, run the Auto Adjustment software, contained on
the CD included with your monitor, before pressing the Auto
button.
TFT1701.book Page 13 Monday, July 29, 2002 3:31 PM