Filter
Top Products
A–2 User’s Guide
Troubleshooting
Image is not
centered.
Position may need
adjustment.
Press the Menu button
to access the OSD
menu. Select Position to
adjust the horizontal or
vertical position of the
image.
“Check Signal
Cable” is displayed
on screen.
Monitor video cable is
disconnected.
Connect the 15-pin
monitor video cable to
the computer. Be sure
that the computer power
is on.
“Video Mode Not
Supported” is
displayed on screen.
Video resolution and/or
refresh rate are set
higher than what your
monitor supports.
Restart your computer
and enter Safe Mode.
Change your settings to
a supported setting (see
“Techn ica l
Specifications”). Restart
your computer so that
the new settings take
effect.
Monitor is
overheating.
There is not enough air
space to allow proper
ventilation.
Leave at least 3 inches
(76 mm) of ventilation
space around the
monitor.
Problem Possible Cause Solution
TFT1701.book Page 2 Monday, July 29, 2002 3:31 PM