●
Faint vertical bars
●
Thin, horizontal scrolling lines
●
An off-center picture
To use the auto-adjustment feature:
1. Allow the monitor to warm up for 20 minutes before adjusting.
2. Press the Auto button on the monitor front panel to produce a stable, centered image.
Front Panel Controls
Table 4-1 Monitor Front Panel Controls
Control Function
1 Auto Activates the auto-adjustment feature.
2 Exit Exits the OSD menu and saves the adjusted settings.
3 – (minus)
●
If the OSD menu is on, press to navigate backward through the OSD
menu and decrease adjustment levels.
●
If the OSD menu is inactive, press to adjust the contrast feature.
4 + (plus)
●
Navigates forward through the OSD menu and increases adjustment
levels.
●
When the OSD menu is inactive, press to adjust the brightness
feature.
5 Select Opens and selects the OSD menu.
6 Power Turns the monitor on or off.
12 Chapter 4 Operating the Monitor