Filter
Top Products
6
Operate the paper path lever on the lower
left side up the front of the printer to select
the paper path.
Pushing the lever up causes the paper to be
ejected in the tray on the top.
Pushing the lever down causes the paper to
be ejected from the font of the printer.
Do not operate the lever during copying as
this could cause paper jams.
If there are many copies, to be printed use
the paper eject tray on the top.
To attach the toner cartridge, first remove the
toner cartridge from the package. (Keep the
package in a safe place for re-storage of the
cartridge).
Hold the cover with both hands and pull
toward you to open.
Shake the toner cartridge well to evenly
distribute the toner in the cartridge.
Hold the ends of the sealing tape attached
to the side of the cartridge and pull it to
completely remove the tape from the
cartridge. The length of the tape after
removal is 490 mm (19.3 inches) or twice
the length of the cartridge.
While grasping the handle on the cartridge
(so that the arrow is facing the printer side),
insert the cartridge in the printer. Be sure
that the ends of the cartridge match the
groove on the black plastic section. Insert
the cartridge all the way to the back and
close the printer cover.
Up
Selecting the Paper Path
Attaching the toner cartridge
Down
OPERATION