Filter
Top Products
Table 2-1 Installation and Configuration Checklist (continued)
Where DocumentedTask DescriptionTask Category
Section 5.4
Run the discover --enclosurebased
--network command on the head node to
discover the switches
Section 5.5Setthe OnboardAdministratorpassword,which
must match the passwords on the ProCurve
switches and console management devices
Section 5.6
Run the discover --enclosurebased
--enclosures and discover
--enclosurebased --nodes commands to
discover the remainder of the hardware
components
Section 6.1 and theHP XC Hardware
Preparation Guide
Make BIOS settings on non-blade servers
according to regular procedures
BIOS Settings on Nodes
Section 6.2 and Section 6.3Make BIOS settings on server blades
Section 7.1Install software patches that might be available
forthe releaseof HPXCSystem Software youare
installing
System Configuration
Section 7.2Perform various configuration tasksto set upthe
system environment
Run the cluster_config utility on the head
node to configure the system and create the
golden image
Section 7.2.2
Run the startsys command to start all nodes
in the systemand propagate the goldenimage to
all nodes
Section 7.3Run system verification tasks, including the
operation verification program (OVP), to verify
that the system is operating correctly
14 Task Summary and Checklist